Durokea S
Is DuroKea S safe for skin?
It is safe for skin as the ingredients used are all approved by FDA, USA for cosmeceutical use. The skin irritation test has been performed by NABL accredited laboratory and certified as safe on skin.
Can DuroKea S be used as a hand sanitizer, as it has been mentioned safe on skin?
No. DuroKea S is ONLY for Non-Living Surface. It is safe on skin means if the liquid falls on your skin during application you will not feel any irritation or you can touch the DuroKea S coated surface and it is safe for your skin.
Can DuroKea S can be used on polished/varnished wooden surface?
NO. DuroKea S is alcohol (ethanol) based product. The varnished paint is soluble in alcohol. So, it is not recommended to spray on polished or varnished wood surface. It may discolour the varnished surface.
How can I apply on the door handle of my polished/varnished wooden door?
You can cover the wooden surface with polyethylene/paper/cloth such that only the metallic surface is exposed. You can carefully spray on the metallic surface thus avoiding the wooden surface.
Can I use DuroKea S on electronic display surface?
It is not recommended to apply on such display surfaces. The multiple layers of nanoparticle coating may reduce the transparency of the screen.
Can DuroKea S kill Corona Virus when it comes in contact with the surface?
Laboratory test results show that when corona virus suspension is placed on DuroKea S coated surface, 100 percent virus killing is observed within 60 seconds of incubation on the surface.
Is DuroKea S effective to kill standard pathogen?
Yes. The NABL accredited laboratory has tested the efficacy of DuroKea S towards seven different pathogenic bacteria and fungus. It was found that 99.99 % of these pathogenic bacteria and fungus were killed within 60 seconds on the DuroKea S coated surface.
DuroKea S is a nano-formulation which makes coating on surface. Why is the surface coating visible to the naked eye?
It contains ~100 nm nano-formulation particles. Ideally, you cannot see if the surface is coated with 100 nm particles. However, when you spray DuroKea S on the surface, its surface adhesive nano-formulation may coat on the surface in multiple layers based on your spray amount. You can visualize the multiple layers of nanoparticles on the surface.
If I see the removal of visual coating on the surface (particularly shiny surface), does it mean no coating of DuroKea S, thus surface is unprotected?
Our field test and scanning electron microscopic images shows the existence of nanoscale coating on the surface even when there is no visual coating of DuroKea S. So, surface is protected and you are protected. Even if you have any doubt it is better to spray DuroKea S on that area. In fact, our laboratory test shows that if the DuroKea S coated surface dries properly, it can withstand more than 3000 touches.
What is a long-lasting surface disinfectant and why is it important?
Conventional surface disinfectants containing alcohol kills the germs instantly upon spraying on the surface. As the liquid alcohol dries out, the surface will be contaminated again when people touch the surface or sneeze, cough and talk around the surface. If you touch this contaminated surface, you may be infected by the germs existing on the surface. Corona Virus can survive on such surfaces for several days and the spreading of virus through contaminated surface is very high. No matter how frequently you use the conventional surface disinfectants, you are vulnerable to germs or COVID-19 virus. In this current pandemic, if you want to protect yourself, you need to use something other than the conventional surface disinfectants on the commonly touched surface which can constantly kill germs including Corona Virus. Isn’t it? Concept of long-lasting Surface Disinfectant is obvious in this current pandemic situation and provides this constant protection.
How does long-lasting disinfectant work?
When you apply long-lasting surface disinfectant on a surface, its active molecules kill existing germs and makes a coating on the surface. This coating has molecules that can kill germs whenever it comes in contact with the surface. So, the chances of getting infected from the contaminated surface will be minimized. Moreover, in case of Corona Virus, good long-lasting surface disinfectant is the one which kill virus instantly.
Why alcohol-based sanitizing product is preferred by the medical community?
Since ages, the medical community practices the use of alcohol-based disinfectants / sanitizing products as they are the most effective in killing germs instantly including Corona Virus. Thus, they mostly prefer and trust disinfectants that are alcohol-based. In fact, the Center for Disease Control and Prevention (CDC), USA also recommends alcohol-based disinfectants.
How unique is DuroKea S as a long-lasting surface disinfectant?
DuroKea S is a patented nano-formulation based long-lasting alcohol surface disinfectant. It is the only long-lasting (up to 35 Days) Surface Disinfectant product available in the current market which is alcohol-based. Once you apply, its alcohol component instantly (in less than 30 seconds) kill germs. Volatile alcohol evaporates and leaves nano-formulation coating on hard and soft surfaces. The release of active molecules from nano-formulation and special physicochemical properties of coated nanoparticles (positive charges) constantly kill germs within 60 seconds (in case of Corona Virus within 60 seconds) when it comes in contact with the coated surface. Moreover, after spraying of surface disinfectant on the surface, wiping is a hectic job. DuroKea S is alcohol based and does not need any wiping which saves time and labour. The fast (instant) or active killing of germs particularly Corona Virus is important as this will minimize the spreading of the virus or germs. DuroKea S is unique from the existing long-lasting surface disinfectants available in the market in terms of efficacy, price, and acceptability (see below).
Durokea H
Conventional Sanitizer needs to rub, but can DuroKea H be rubbed in similar way?
No. You need to spray using spray dispenser (50 ml and 100 ml) all over your palm and fingers to make sure liquid alcohol covers your palms and fingers. Then allow it to air dry completely. This process will make sure uniform coating of nano-formulation on your skin. In case of push dispenser bottle (500 ml) take 3-5 ml of sanitizer from push dispenser bottle in your hand. Apply all over your palm and fingers by gently rubbing to make sure liquid alcohol covers your palms and fingers. Vigorous rubbing may result in non-uniform coating of nano-formulation on your hands and deviate from expected protection. 1.DuroKea H from spray bottle application:
2. DuroKea H from Dispenser bottle application
Do we need to re-apply after hand washing?
The nano-formulation is designed in such a way that it will wash out when you clean your hand using soap. You need to re-apply whenever you wash your hands using water.
Is DuroKea H safe for skin?
It is safe for skin as all the ingredients used are approved by FDA, USA for cosmeceutical use. The skin irritation test has been performed by NABL accredited laboratory and certified as safe on skin.
Can DuroKea H kill Corona Virus when it comes in contact with the hand?
Laboratory test results show that when coronavirus suspension is placed on DuroKea H coated surface, 100 percent virus killing is observed within <60 seconds of incubation on the surface.
Is DuroKea H effective to kill standard pathogens?
Yes. The NABL accredited laboratory has tested the efficacy of DuroKea H towards seven different pathogenic bacteria and fungus. It was found that 99.99 % of these pathogenic bacteria and fungus were killed within 60 seconds on the DuroKea H coated surface.
What is long-lasting hand sanitizer and why you want it?
Conventional alcohol-based hand sanitizers kill germs including Corona Virus instantly and make your hands germ free. As the alcohol dries out in less than a minute, your hand will be contaminated again when you touch any other surface. Knowingly or unknowingly we frequently touch our hand to our facial area. You may get infected by germs through your contaminated hand. No matter how frequently you use the conventional hand sanitizers, you are vulnerable to germs or COVID-19 virus (can live for a few days on surface). In this current COVID-19 pandemic, if you want to protect yourself from your contaminated hand-mediated infection, you need to use something other than conventional hand sanitizers on your hand which can constantly kill germs including Corona Virus. Isn’t it? Concept of long-lasting Hand Sanitizer is obvious in this current pandemic situation and provides this constant protection.
How does long-lastinghand sanitizer work?
Conventional alcohol-based hand sanitizers kill germs including Corona Virus instantly and make your hands germ free. As the alcohol dries out in less than a minute, your hand will be contaminated again when you touch any other surface. Knowingly or unknowingly we frequently touch our hand to our facial area. You may get infected by germs through your contaminated hand. No matter how frequently you use the conventional hand sanitizers, you are vulnerable to germs or COVID-19 virus (can live for a few days on surface). In this current COVID-19 pandemic, if you want to protect yourself from your contaminated hand-mediated infection, you need to use something other than conventional hand sanitizers on your hand which can constantly kill germs including Corona Virus. Isn’t it? Concept of Long-lasting Hand Sanitizer is obvious in this current pandemic situation and provides this constant protection.
Why alcohol-based sanitizing productis preferred by medical community?
Since ages, the medical community practices the use of alcohol-based disinfectants/sanitizing products as they are the most effective in killing germs instantly including Corona Virus. Alcohol instantly kills all germs including Corona Virus upon application to your hand. Thus, they mostly prefer and trust disinfectants that are alcohol-based. In fact, the Centers for Disease Control and Prevention (CDC), USA also recommends alcohol-based disinfectants.
Durokea H Aqua
Conventional Sanitizer needs to rub, but can DuroKea H Aqua be rubbed in similar way?
No. You need to dispense four full press of foam on to your palm. Spread the liquid all over your palm. Then allow it to air dry completely. This process will make sure uniform coating of nano-formulation on your skin. Vigorous rubbing may result in non-uniform coating of nano-formulation on your hands and deviate from expected protection. We can show graphics of application here.
Do we need to re-apply after hand washing?
The nano-formulation is designed in such a way that it will wash out when you clean your hand using soap. You need to re-apply whenever you wash your hands using water.
Is DuroKea H Aqua safe for children?
It is a child friendly alcohol-free hand sanitizer. It is completely safe for skin as all the ingredients used are approved by FDA, USA for cosmeceutical use. The skin irritation test has been performed by NABL accredited laboratory and certified as safe on skin.
Can DuroKea H Aqua kill Corona Virus when it comes in contact with the hand?
Laboratory test results show that when coronavirus suspension is placed on DuroKea H Aqua coated surface, 100 percent virus killing is observed within 60 seconds of incubation on the surface.
Is DuroKea H Aqua effective to kill standard pathogens?
Yes. The NABL accredited laboratory has tested the efficacy of DuroKea H Aqua towards seven different pathogenic bacteria and fungus. It was found that 99.99 % of these pathogenic bacteria and fungus were killed within 60 seconds on the DuroKea H Aqua coated surface.
What is long-lasting hand sanitizer and why you want it?
Conventional hand sanitizers kill germs including Corona Virus instantly and make your hands germ free. As the alcohol dries out in less than a minute, your hand will be contaminated again when you touch any other surface. Knowingly or unknowingly we frequently touch our hand to our facial area. You may get infected by germs through your contaminated hand. No matter how frequently you use the conventional hand sanitizers, you are vulnerable to germs or COVID-19 virus (can live for a few days on surface). In this current COVID-19 pandemic, if you want to protect yourself from your contaminated hand-mediated infection, you need to use something other than conventional hand sanitizers on your hand which can constantly kill germs including Corona Virus. Isn’t it? Concept of long-lasting hand sanitizer is obvious in this current pandemic situation and provides this constant protection.
How does long-lasting hand sanitizer work?
When you apply long-lasting hand sanitizer on your hand, its active molecules make a coating on your hand surface and keep on killing germs whenever it comes in contact to your coated skin. So, the chances of getting infection through your contaminated hand will be minimized.
How unique is DuroKea H Aqua as long-lasting hand sanitizer?
DuroKea H Aqua is a patented nano-formulation-based long-lasting aqua hand sanitizer. Once you apply, it instantly (in less than 30 seconds) kills germs on your hand and makes a nano-formulation coating on the hand surface. Relatively lower pH (< 7.4) and moisture enhances the release of active molecules from the nano-formulation and remains available to kill germs instantly. The unique nano formulation instantly kills germs including Corona Virus. DuroKea H Aqua is unique from existing long-lasting hand sanitizer available in the market in view of efficacy, price, and acceptability (see below).
Durokea M
Can DuroKea M be used as hand sanitizer or surface disinfectant?
No. This formulation has been made only for the mask surface.
Can it be used for cloths?
The DuroKea M nano-formulation can instantly coat on the different fabric surfaces of mask and make it antimicrobial/anti-virus surface. Ideally, you can spray on your cloth to make antiviral depending on the type of cloth. But it is not recommended to use on your cloths as alcohol may damage your cloth.
Do we need to reapply after washing?
Yes. The efficacy of nano-formulation coating on the mask surface reduce after washing. So, after washing your reusable mask, you need to reapply DuroKea M on the outer surface of the mask. It is not recommended for washing of Surgical (3-layer) and thus there is no need to reapply DuroKea M till you
Is DuroKea M safe for skin?
It is safe for skin as the ingredients used are all approved by FDA, USA for cosmeceutical use. The skin irritation test has been performed by NABL accredited laboratory and certified as safe on skin.
Can DuroKea M kill Corona Virus when coming in contact with hand?
Laboratory test result shows that when corona virus suspension placed on DuroKea M coated surface, 100 percent virus killing was observed within <60 seconds of incubation on the surface.
Is DuroKea M effective to kill standard pathogen?
Yes. The NABL accredited laboratory has tested the efficacy of DuroKea M towards seven different pathogenic bacteria and fungus. It was found that 99.99 % of these pathogenic bacteria and fungus were killed within 60 seconds on the DuroKea M coated surface.
Is DuroKea M can be used inner surface of the mask?
No. It is recommended to use only on the outer surface of mask. Coating on the outer surface of the mask is essential to kill pathogen before it enters to your inhalation system. Thus, coating on the outer mask surface is essential for your protection.
What is long-lasting antimicrobial coating for mask and why is it important?
Conventional surface disinfectants containing alcohol kills the germs instantly upon spraying on the surface. As the liquid alcohol dries out, the surface will be contaminated again when people touch the surface or sneeze, cough and talk around the surface. If you touch this contaminated surface, you may be infected by the germs existing on the surface. Corona Virus can survive on such surfaces for several days and the spreading of virus through contaminated surface is very high. No matter how frequently you use the conventional surface disinfectants, you are vulnerable to germs or Covid-19 virus. In this current pandemic, if you want to protect yourself, you need to use something other than the conventional surface disinfectants on the commonly touched surface which can constantly kill germs including Corona Virus. Isn’t it? Concept of long-lasting Surface Disinfectant is obvious in this current pandemic situation and provides this constant protection.
How does long-lasting disinfectant work?
When you apply long-lasting surface disinfectant on a surface, its active molecules kill existing germs and makes a coating on the surface. This coating has molecules that can kill germs whenever it comes in contact with the surface. So, the chances of getting infected from the contaminated surface will be minimized. Moreover, in case of Corona Virus, good long-lasting surface disinfectant is the one which kill virus instantly.
How does long-lasting anti-microbialmask coating work?
When you apply long-lasting coating spray on the outer surface of the mask, its active molecules make coating on the same and keep on killing germs whenever come to contact to the coated surface. So, the chance of getting infection will be minimized.
Why you need fast drying alcohol coatingformulation for mask?
First drying is essential for instant coating application. Unlike nano-silver and nano-cupper product which are mostly aqueous based, uniform coating on hydrophobic mask surface as well as drying is challenging. On the other hand, alcohol-based coating spray such as DuroKea M can easily spread hydrophobic surface and make uniform coating by quickly drying alcohol. Moreover, it has been hundred years of practice of all medical community to use alcohol-based hand sanitizer as it is most effective killing germ molecules. Alcohol instantly kill all most all germs including Corona Virus upon application which is added advantage if you spray on contaminated mask surface.
How unique is DuroKea M aslong-lasting coating spray?
DuroKea M is long-lasting patented nano-formulation-based alcohol coating spray. It is the only long-lasting alcohol-based product available in the current market. Once you apply its alcohol component dry out fast by killing germs if exist on the mask surface. Quick evaporation alcohol leaves nano-formulation coating on the outer surface of the mask. The release of active molecules from nano-formulation and special physicochemical properties of coated nanoparticles (positive charges) constantly kill germs within 60 seconds (in case of Corona Virus the killing time will be <60 seconds) when it comes in contact with the coated surface. DuroKea M is unique from existing mask coating spray available in the foreign market in view of efficacy, price, and acceptability (see below).